Glass fiber reinforced plastic cable trays have low thermal conductivity and the addition of flame retardants, which not only has fire resistance, heat insulation and self-extinguishing properties, but also high corrosion resistance. At the same time, it has light structure and aging resistance. , Safety and reliability, can be easily used with metal bridges, used in chemical, metallurgical, petroleum and other strong corrosive environments.
Wide application, high strength, light weight, reasonable structure, low cost, long life, strong corrosion resistance, simple construction, flexible wiring, standard installation,
nice appearance. Low thermal conductivity. Designable. Excellent workability. Self-extinguishing in case of fire. High safety performance can be easily used with metal bridges,
It is widely used in chemical, metallurgy, petroleum and other strong corrosive environments.
The material of the glass fiber reinforced plastic bridge is composed of glass fiber reinforced plastic, flame retardant and other materials, and is pressed by a composite molding material and a stainless steel shielding net.
The glass fiber reinforced plastic bridge is suitable for the laying of power cables under 10 kV, as well as indoor and outdoor overhead cable trenches and tunnels such as control cables, lighting wiring, pneumatic and hydraulic pipe cables.
FRP bridge has the characteristics of wide application, high strength, light weight, reasonable structure, low cost, long life, strong anti-corrosion, simple construction, flexible wiring, standard installation, and beautiful appearance. It can be used for technical transformation and expansion of your cables. Convenient maintenance.
1. Fixing of cable bridge and connection plate: bolts should be tightened in each connection hole, and nuts leak out of the bridge?
2. The trough cable bridge protrudes out of the building wall, and its inclination must not be less than 1/100
3. The net distance between the cable tray and the electrical equipment must not be less than 0.5 meters. The net distance of the cable tray when laying flat shall not be less than 0.6 meters
4. The supported distance between cable trays should be between 1 meter and 2 meters.