王中王资料十码中特

Hot search word: FRP bridge cable cable tray

Manufacturers explain the production process of FRP cable bracket

Date: 2019-09-29 Popularity:
Manufacturers explain the production process of FRP cable bracket
Glass fiber reinforced plastic cable support is made of high flame retardant polyester, high density glass fiber and high strength zinc material at one time. It is widely used in railway, highway, subway, tunnel, municipal construction, bridge, petroleum, chemical, computer cable and other industries. . It has the characteristics of protecting cables, good insulation, heat insulation, cold resistance, flame resistance, aging resistance, corrosion resistance and so on. The production process of FRP cable bracket is as follows:
Preparation of glue solution: Weigh various raw materials according to the ratio and prepare into glue solution. When preparing, cyclohexanone peroxide cannot be directly mixed with cobalt naphthalate to prevent explosion. If the glass fiber reinforced plastic tile made of flame retardant is required, unsaturated resin can be changed to No. 302 flame retardant polyester, or flame retardant is added to the glue; if the glass fiber reinforced plastic tile made of high transparency is required, special transparent resin should be used .
Cutting fiberglass gingham: According to the specifications of glass fiber reinforced plastic tile, the cable tube box will cut the fiberglass gingham into pieces for use. The remaining pieces of the crop can still be stitched according to specifications.
Curing: The curing time is about one day. After solidification, the glass fiber reinforced plastic tile blank is obtained, and the blank is trimmed and trimmed with an electric saw or a manual saw according to specifications, and the finished product is obtained.
Forming: Fix the mold, firstly put on polyester film, put the fiberglass gingham on the tube box, then apply the glue to the predetermined thickness, put on the fiberglass gingham, then apply the glue on the predetermined thickness, and cover Polyester film. Repeat this process until the planned number of sheets is reached, and then cover it with the upper mold.