Our company is a professional manufacturer of epoxy resin composite bridges. It has
an excellent location, complete production equipment, strong technical force, perfect testing methods, reliable product quality, warm and thoughtful service, and keeping promises. It has won unanimous praise from customers. Installation of epoxy composite bridge bracket.
If the installation of the epoxy resin composite bridge bracket has the installation and construction conditions, timely arrange the construction personnel to enter the site for construction, and fill out a work order and report it to the supervision unit. The technicians should do the technical and safety work on site, and determine the installation position of the L bracket according to the construction drawing of the box installation. Care should be taken to avoid drain holes at the bottom edge of the guardrail. According to the site conditions, a suitable plug-in mobile platform is made, and its safety performance is approved by the supervisor. Only those who agree to put into use can be used for field installation.
According to the determined size, take a hole at each end of the same straight line segment, install the bracket with the specified expansion bolts and fix it firmly, and draw a line between the two layers of the same bracket. Perforate the fixing brackets at intervals of 1 meter until the brackets of the guardrail on the bridge are completely installed. Make sure that the brackets are on the same level and the height deviation does not exceed 5mm. After the bracket is installed, it shall be reported to the supervisor for inspection and acceptance, and the tube box shall be installed after passing.